Command Line Interface Guide

1172 Multicast Commands
Multicast Forwarding Cache Entry Count.. 0
show ip mcast boundary
Use the show ip mcast boundary command in Privileged EXEC mode to
display all the configured administrative scoped multicast boundaries.
Syntax
show ip mcast boundary {vlan vlan-id | all}
• vlan-id — Valid VLAN ID.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays all the configured administrative scoped
multicast boundaries.
console#show ip mcast boundary all
MULTICAST BOUNDARY
Interface Group Ip Mask
-------- ------ ---------------
show ip multicast interface
Use the show ip multicast interface command in Privileged EXEC mode to
display the multicast information for the specified interface.
2CSPC4.X8100-SWUM100.book Page 1172 Wednesday, August 29, 2012 6:23 PM