Command Line Interface Guide

Multicast Commands 1173
Syntax
show ip multicast interface [type number]
Syntax Description
Default Configuration
Show information for all multicast interfaces.
Command Mode
User EXEC, Privileged EXEC modes, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the multicast information for VLAN 15.
console#show ip mcast interface vlan 15
Interface TTL
--------- -----
show ip mcast mroute
Use the show ip mcast mroute command in Privileged EXEC mode to display
a summary or all the details of the multicast table.
Syntax
show ip mcast mroute {detail | summary}
Parameter Description
type number Interface type and number for which to display IP multicast
information. VLAN Vlan-ID is the only supported type and
number
2CSPC4.X8100-SWUM100.book Page 1173 Wednesday, August 29, 2012 6:23 PM