Command Line Interface Guide

Multicast Commands 1179
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC and Privileged EXEC modes, Config mode and all Config sub-
modes
User Guidelines
There are no user guidelines for this command.
Example
(console) #show ip pim interface
InterfaceVLAN0010
ModeSparse
Hello Interval (secs)30
Join Prune Interval (secs)60
DR Priority1
BSR BorderDisabled
Neighbor Count1
Designated Router192.168.10.1
InterfaceVLAN0001
ModeSparse
BSR Border Whether or not this interface is configured as a BSR Border
Neighbor Count Number of PIM Neighbors learnt on this interface
Designated-Router IP address of the elected DR on the interface
Field Description
2CSPC4.X8100-SWUM100.book Page 1179 Wednesday, August 29, 2012 6:23 PM