Command Line Interface Guide

Multicast Commands 1183
Syntax
show ip pim rp mapping [ rp-address |candidate|static]
rp-address — An RP address.
Default configuration
There is no default configuration for this command.
Command Mode
User EXEC, Privileged EXEC modes, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
Field Descriptions
Example
console#show ip pim rp mapping candidate
RP Address....................................
192.168.10.1
Group Address..............................
224.1.2.1
Group Mask.................................
255.255.0.0
Origin..................................... BSR
C-RP Advertisement Interval (secs)......... 60
Field Description
RP Address Address of the RP
Group Address Address of the multicast group.
Group Mask Mask for the group address.
Origin Origin from where this group mapping is learned.
2CSPC4.X8100-SWUM100.book Page 1183 Wednesday, August 29, 2012 6:23 PM