Command Line Interface Guide

1198 IPv6 Multicast Commands
show ipv6 pim bsr
Use the show ipv6 pim bsr command to display the bootstrap router (BSR)
information. The output includes elected BSR information and information
about the locally configured candidate rendezvous point (RP) advertisement.
Syntax
show ipv6 pim bsr
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
Example
console#show ipv6 pim bsr
BSR Address....................................
3001::1
BSR Priority................................... 23
BSR Hash Mask Length........................... 10
Next bootstrap message(hh:mm:ss)...............
00:00:11
Next Candidate RP advertisement(hh:mm:ss)......
00:00:12
show ipv6 pim bsr-router
Use the show ipv6 pim bsr-router command to display the bootstrap router
(BSR) information.
2CSPC4.X8100-SWUM100.book Page 1198 Wednesday, August 29, 2012 6:23 PM