Command Line Interface Guide

IPv6 Multicast Commands 1201
DR Priority.................................... 1
BSR Border.....................................
Disabled
show ipv6 pim neighbor
Use the show ipv6 pim neighbor command to display IPv6 PIMSM neighbors
learned on the routing interfaces.
Syntax
show ipv6 pim neighbor [ all | interface vlan vlan-id ]
• vlan-id —A valid VLAN ID value.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
Example
console#show ipv6 pim neighbor all
Slot/Port...................................... vlan
6
Neighbor Address...............................
FE80::200:FF:FE00:33
Up Time (hh:mm:ss).............................
00:00:12
Expiry Time (hh:mm:ss).........................
00:01:34
DR Priority.................................... 0
2CSPC4.X8100-SWUM100.book Page 1201 Wednesday, August 29, 2012 6:23 PM