Command Line Interface Guide

IPv6 Multicast Commands 1203
Syntax
show ipv6 pim rp mapping [ rp-address ]
• rp-address —IP address of RP.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
Example
console#show ipv6 pim rp mapping
Group Address..................................
FF1E::/64
RP Address.....................................
2001::1
origin.........................................
Static
Group Address..................................
FF1E::/64
RP Address.....................................
3001::1
origin......................................... BSR
2CSPC4.X8100-SWUM100.book Page 1203 Wednesday, August 29, 2012 6:23 PM