Command Line Interface Guide

122 Command Groups
DVMRP
domain-name (IPv6 DHCP
Pool Config)
Sets the DNS domain name which is provided
to a DHCPv6 client by the DHCPv6 server.
v6DP
ipv6 dhcp pool Enters IPv6 DHCP Pool Configuration mode. GC
ipv6 dhcp relay Configures an interface for DHCPv6 Relay
functionality.
IC
ipv6 dhcp server Configures DHCPv6 server functionality on an
interface.
IC
prefix-delegation Defines Multiple IPv6 prefixes within a pool for
distributing to specific DHCPv6 Prefix
delegation clients.
v6DP
service dhcpv6 Enables DHCPv6 configuration on the router. GC
show ipv6 dhcp Displays the DHCPv6 server name and status. PE
show ipv6 dhcp binding Displays the configured DHCP pool. PE
show ipv6 dhcp interface
(User EXEC)
Displays DHCPv6 information for all relevant
interfaces or a specified interface.
UE
PE
show ipv6 dhcp pool Displays the configured DHCP pool. PE
show ipv6 dhcp statistics Displays the DHCPv6 server name and status. UE
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
Command Description Mode
a
ip dvmrp S ets the administrative mode of DVMRP in the
router to active.
GC
IC
ip dvmrp metric Configures the metric for an interface. IC
show ip dvmrp Displays the system-wide information for
DVMRP.
PE
show ip dvmrp interface Displays the interface information for DVMRP
on the specified interface.
PE
show ip dvmrp neighbor Displays the neighbor information for DVMRP. PE
Command Description Mode
a
2CSPC4.X8100-SWUM100.book Page 122 Wednesday, August 29, 2012 6:23 PM