Command Line Interface Guide

1266 OSPF Commands
External LSDB Limit...................... No Limit
Exit Overflow Interval................... 0
Spf Delay Time........................... 5
Spf Hold Time............................ 10
Opaque Capability........................ Disable
AutoCost Ref BW.......................... 100 Mbps
Default Passive Setting.................. Disabled
Maximum Paths........................ 4
Default Metric....................... Not configured
Default Route Advertise.............. Disabled
Always............................... FALSE
Metric............................... Not configured
Metric Type.......................... External Type 2
Number of Active Areas... 1 (1 normal, 0 stub, 0 nssa)
ABR Status........................... Disable
ASBR Status.......................... Disable
Stub Router.......................... FALSE
External LSDB Overflow............... FALSE
External LSA Count................... 0
External LSA Checksum................ 0
AS_OPAQUE LSA Count.................. 0
AS_OPAQUE LSA Checksum............... 0
New LSAs Originated.................. 25
2CSPC4.X8100-SWUM100.book Page 1266 Wednesday, August 29, 2012 6:23 PM