Command Line Interface Guide

OSPF Commands 1267
LSAs Received........................ 7
LSA Count............................ 4
Maximum Number of LSAs............... 18200
LSA High Water Mark.................. 4
Retransmit List Entries.............. 0
Maximum Number of Retransmit Entries..72800
Retransmit Entries High Water Mark... 2
NSF Support........................... Disabled
NSF Restart Interval.................. 120
NSF Restart Status.................... Not Restarting
NSF Restart Age....................... 0 seconds
NSF Restart Exit Reason............... Not Attempted
NSF Helper Support.................... Always
NSF Helper Strict LSA Checking........ Enabled
Example #2
The following example displays the length of the global flood queue for LSAs
with AS flooding scope and for stub router configuration. Also displayed are
the values of the LSA pacing configuration parameters.
console#show ip ospf
Router ID...................................... 1.1.1.1
OSPF Admin Mode................................ Enable
RFC 1583 Compatibility......................... Enable
External LSDB Limit............................ No Limit
Exit Overflow Interval......................... 0
Spf Delay Time................................. 5
Spf Hold Time.................................. 10
2CSPC4.X8100-SWUM100.book Page 1267 Wednesday, August 29, 2012 6:23 PM