Command Line Interface Guide

1268 OSPF Commands
Flood Pacing Interval.......................... 33 ms
LSA Refresh Group Pacing Time.................. 60 sec
Opaque Capability.............................. Enable
AutoCost Ref BW................................ 100 Mbps
Default Passive Setting........................ Disabled
Maximum Paths.................................. 4
Default Metric................................. Not
configured
Stub Router Configuration...................... <val>
Stub Router Startup Time....................... <val>
seconds
Summary LSA Metric Override.................... Enabled
(<met>)
Default Route Advertise........................ Disabled
Always......................................... FALSE
Metric......................................... Not
configured
Metric Type.................................... External
Type 2
Number of Active Areas......................... 2 (2 normal,
0 stub, 0 nssa)
ABR Status..................................... Enable
ASBR Status.................................... Disable
Stub Router Status............................. Inactive
Stub Router Reason............................. <reason>
Stub Router Time Remaining..................... <duration>
seconds
2CSPC4.X8100-SWUM100.book Page 1268 Wednesday, August 29, 2012 6:23 PM