Command Line Interface Guide

OSPF Commands 1269
External LSDB Overflow......................... FALSE
External LSA Count............................. 0
External LSA Checksum.......................... 0
AS_OPAQUE LSA Count............................ 0
AS_OPAQUE LSA Checksum......................... 0
New LSAs Originated............................ 300269
LSAs Received.................................. 300276
LSA Count...................................... 6020
Maximum Number of LSAs......................... 36968
LSA High Water Mark............................ 6020
AS Scope LSA Flood List Length................. 0
Retransmit List Entries........................ 0
Maximum Number of Retransmit Entries........... 147872
Retransmit Entries High Water Mark............. 32616
NSF Helper Support............................. Always
NSF Helper Strict LSA Checking................. Enabled
show ip ospf abr
The show ip ospf abr command displays the internal OSPF routing table
entries to Area Border Routers (ABR). This command takes no options.
Syntax
show ip ospf abr
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
2CSPC4.X8100-SWUM100.book Page 1269 Wednesday, August 29, 2012 6:23 PM