Command Line Interface Guide

1270 OSPF Commands

User Guidelines

There are no user guidelines for this command.

Example

console#show ip ospf abr

Type Router Id Cost Area ID Next

Hop Next Hop

ntf

----- --------- ----- --------------- --------- -

-------

INTRA 3.3.3.3 1 0.0.0.1 10.1.23.3 v

lan11

INTRA 4.4.4.4 10 0.0.0.1 10.1.24.4 v

lan12

show ip ospf area

Use the show ip ospf area command in Privileged EXEC mode to display

information about the identified OSPF area.

Syntax

show ip ospf area area-id

Default Configuration

This command has no default configuration.

Field Description

area-id

Identifies the OSPF area whose ranges are being displayed.

(Range: 0–4294967295)

Flood List Length The number of LSAs waiting to be flooded within the area.

2CSPC4.X8100-SWUM100.book Page 1270 Wednesday, August 29, 2012 6:23 PM