Command Line Interface Guide

OSPF Commands 1271
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example #1
The following example displays OSPF router information.
console#show ip ospf area 10
AreaID.........................................
0.0.0.10
External Routing...............................
Import External LSAs
Spf Runs....................................... 0
Area Border Router Count....................... 0
Area LSA Count................................. 0
Area LSA Checksum.............................. 0
Import Summary LSAs............................
Enable
Example #2
console#show ip ospf area 20
AreaID.........................................
0.0.0.20
External Routing...............................
Import NSSAs
Spf Runs....................................... 0
Area Border Router Count....................... 0
Area LSA Count................................. 0
Area LSA Checksum.............................. 0
2CSPC4.X8100-SWUM100.book Page 1271 Wednesday, August 29, 2012 6:23 PM