Command Line Interface Guide

1272 OSPF Commands
OSPF NSSA Specific Information.
Import Summary LSAs............................
Enable
Redistribute into NSSA.........................
Enable
Default Information Originate.................. TRUE
Default Metric................................. 250
Default Metric Type............................ Non-
Comparable
Translator Role................................
Candidate
Translator Stability Interval.................. 2000
Translator State...............................
Disabled
Example #3
The following example shows the length of the area’s flood queue for LSAs
waiting to be flooded within the area.
console #show ip ospf area 1
AreaID......................................... 0.0.0.1
External Routing............................... Import
External LSAs
Spf Runs....................................... 10
Area Border Router Count....................... 0
Area LSA Count................................. 3004
Area LSA Checksum.............................. 0x5e0abed
Flood List Length.............................. 0
Import Summary LSAs............................ Enable
2CSPC4.X8100-SWUM100.book Page 1272 Wednesday, August 29, 2012 6:23 PM