Command Line Interface Guide

1282 OSPF Commands
Syntax
show ip ospf interface brief
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays brief information for the IFO object or virtual
interface tables.
console#show ip ospf interface brief
Router Hello Dead Retrax Retrax LSAAck
Interface AdminMode Area
ID Priority Intval Intval Intval Delay Intval
--------- --------- ------- -------- ------ ------ --
---- ----- ------
vlan1 Enable 0.0.0.10 1 10 40
511
vlan2 Disable 0.0.0.0 1 10 40
511
vlan3 Disable 0.0.0.0 1 10 40
511
loopback2 Disable 0.0.0.0 1 10 40
511
2CSPC4.X8100-SWUM100.book Page 1282 Wednesday, August 29, 2012 6:23 PM