Command Line Interface Guide

OSPF Commands 1283
show ip ospf interface stats
Use the show ip ospf interface stats command in User EXEC mode to display
the statistics for a specific interface. The information is only displayed if
OSPF is enabled.
Syntax
show ip ospf interface stats vlan vlan-id
• vlan-id — Valid VLAN ID.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the ospf statistics for VLAN 15.
console>show ip ospf interface stats vlan15
OSPF Area ID.......................................
0.0.0.0
Area Border Router
Count................................. 0
AS Border Router
Count................................... 0
Area LSA
Count........................................... 1
IP Address.........................................
2.2.2.2
2CSPC4.X8100-SWUM100.book Page 1283 Wednesday, August 29, 2012 6:23 PM