Command Line Interface Guide

OSPF Commands 1285
Example
The following examples display information about OSPF neighbors on the
specified Ethernet and IP interfaces.
console#show ip ospf neighbor 3.3.3.3
Interface...................................... 0/25
Neighbor IP Address............................ 172.20.25.3
Interface Index................................ 25
Area Id........................................ 0.0.0.0
Options........................................ 0x2
Router Priority................................ 1
Dead timer due in (secs)....................... 10
Up Time........................................ 4 days 3
hrs 33 mins 36 secs
State.......................................... Full/PtP
Events......................................... 4
Retransmitted LSAs............................. 32
Retransmission Queue Length.................... 0
Restart Helper Status........................ Not helping
Restart Helper Exit Reason................... Not attempted
Field Description
Field Description
Interface The name of the interface on which the adjacency is formed.
Neighbor IP Address
The IPv4 address on the neighbor's interface used to form the
adjacency.
Interface Index The SNMP interface index.
Area Id The OSPF area in which the adjacency is formed.
Options
The options advertised by the neighbor.
Router Priority The router priority advertised by the neighbor.
2CSPC4.X8100-SWUM100.book Page 1285 Wednesday, August 29, 2012 6:23 PM