Command Line Interface Guide

1288 OSPF Commands
Syntax
show ip ospf range area-id
Field Descriptions
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays information about the area ranges configured
for the specified area-id.
console#show ip ospf range 0
Prefix Subnet Mask Type Action Cost Active
10.1.0.0 255.255.0.0 S Advertise Auto N
172.20.0.0 255.255.0.0 S Advertise 500 Y
Field Description
area-id Identifies the OSPF area whose ranges are being displayed.
(Range: IP address or decimal from 0–4294967295)
Prefix The summary prefix.
Subnet Mask The subnetwork mask of the summary prefix.
Type S (Summary Link) or E (External Link)
Action Advertise or Suppress
Cost Metric to be advertised when the range is active. If a static cost
is not configured, the field displays Auto. If the action is
Suppress, the field displays N/A.
Active Whether the range is currently active (Y) or not (N).
2CSPC4.X8100-SWUM100.book Page 1288 Wednesday, August 29, 2012 6:23 PM