Command Line Interface Guide

1298 OSPF Commands
User Guidelines
This command has no user guidelines.
Examples
The following shows example CLI display output for the command.
console# show routing heap summary
Heap Size....................... 92594000 bytes
Memory In Use................... 149598 bytes (0%)
Memory on Free List............. 78721 bytes (0%)
Memory Available in Heap........ 92365249 bytes (99%)
In Use High Water Mark.......... 210788 bytes (0%)
timers pacing flood
Use the timers pacing flood command in router OSPF Global Configuration
mode to adjust the rate at which OSPFv2 sends LS Update packets.
Use the no form of the command to return the timer pacing to the default
value.
Syntax
timers pacing flood milliseconds
no timers pacing flood
Parameter Description
Default Configuration
The default pacing between LS Update packets is 33 ms.
Parameter Description
milliseconds The average time between transmission of LS Update packets.
The range is from 5 ms to 100 ms. The default is 33 ms.
2CSPC4.X8100-SWUM100.book Page 1298 Wednesday, August 29, 2012 6:23 PM