Command Line Interface Guide

1344 OSPFv3 Commands
Type Router Id Cost Area ID Next
Hop Next Hop
Intf
---- -------- ---- -------- -------------------
---- -----
INTRA 3.3.3.3 10 0.0.0.1 FE80::211:88FF:FE2A:
3CB3 vlan11
INTRA 4.4.4.4 10 0.0.0.1 FE80::210:18FF:FE82:
8E1 vlan12
show ipv6 ospf area
Use the show ipv6 ospf area command in Privileged EXEC mode to display
information about the area.
Syntax
show ipv6 ospf area areaid
• areaid — Identifier for the OSPF area being displayed.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays information about area 1.
console#show ipv6 ospf area 1
AreaID........................................ 0.0.0.1
2CSPC4.X8100-SWUM100.book Page 1344 Wednesday, August 29, 2012 6:23 PM