Command Line Interface Guide

OSPFv3 Commands 1347
• prefix — Displays intra-area Prefix LSA.
•
router — Displays router LSAs.
•
unknown — Displays unknown area, AS or link-scope LSAs.
•
l ink-state- id — Specifies a valid link state identifier (LSID).
•
adv-router — Shows the LSAs that are restricted by the advertising router.
•
router-id — Specifies a valid router identifier.
•
self-originate — Displays the LSAs in that are self originated.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays information about the link state database
when OSPFv3 is enabled.
console#show ipv6 ospf database
Router Link States (Area 0.0.0.0)
Adv Router Link
Id Age Sequence Csum Options Rtr Opt
-------------- --------------- ----- -------- ---- --
----- -------
1.1.1.1 0 4 80000034 54BD V
6E--R- ----B
2.2.2.2 0 2 80000044 95A5 V
6E--R- ----B
2CSPC4.X8100-SWUM100.book Page 1347 Wednesday, August 29, 2012 6:23 PM