Command Line Interface Guide

OSPFv3 Commands 1351
show ipv6 ospf database database-summary
Use the show ipv6 ospf database database-summary command in Privileged
EXEC mode to display the number of each type of LSA in the database and
the total number of LSAs in the database.
Syntax
show ipv6 ospf database database-summary
Syntax Description
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the number of each type of LSA in the
database and the total number of LSAs in the database.
console#show ipv6 ospf database database-summary
OSPF Router with ID (0.0.0.2)
Router database summary
Router......................................... 0
Network........................................ 0
Inter-area Prefix.............................. 0
Inter-area Router.............................. 0
Type-7 Ext..................................... 0
2CSPC4.X8100-SWUM100.book Page 1351 Wednesday, August 29, 2012 6:23 PM