Command Line Interface Guide

138 Command Groups
OSPFv3
show ip ospf range Displays information about the area ranges for
the specified area-id.
PE
show ip ospf statistics Displays information about recent Shortest Path
First (SPF) calculations.
PE
show ip ospf stub table Displays the OSPF stub table. PE
show ip ospf virtual-link Displays the OSPF Virtual Interface information
for a specific area and neighbor.
PE
show ip ospf virtual-links
brief
Displays the OSPF Virtual Interface information
for all areas in the system.
PE
show routing heap
summary
Displays a summary of the memory allocation
from the routing heap.
PE
timers pacing flood Adjusts the rate at which OSPFv2 sends LS
Update packets
OG
timers pacing lsa-group Tunes how OSPF groups LSAs for periodic
refresh.
OG
timers spf Configures the SPF delay and hold time. ROSPF
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
Command Description Mode
a
area default-cost (Router
OSPFv3)
Configures the monetary default cost for the stub
area.
ROSV3
area nssa (Router
OSPFv3)
Configures the specified areaid to function as an
NSSA.
ROSV3
area nssa default-info-
originate (Router
OSPFv3 Config)
Configures the metric value and type for the
default route advertised into the NSSA.
ROSV3
area nssa no-redistribute Configures the NSSA ABR so that learned
external routes will not be redistributed to the
NSSA.
ROSV3
area nssa no-summary Configures the NSSA so that summary LSAs are
not advertised into the NSSA.
ROSV3
Command Description Mode
a
2CSPC4.X8100-SWUM100.book Page 138 Wednesday, August 29, 2012 6:23 PM