Command Line Interface Guide

1388 Routing Information Protocol Commands
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays information related to the VLAN 15 RIP
interface.
console#show ip rip interface vlan 15
Interface...................................... 15
IP Address..................................... -----
Send version................................... RIP-2
Receive version................................ Both
RIP Admin Mode.................................
Disable
Link State..................................... -----
Authentication Type............................ MD5
Authentication Key.............................
"pass123"
Authentication Key ID.......................... 35
Bad Packets Received........................... -----
Bad Routes Received............................ -----
Updates Sent................................... -----
show ip rip interface brief
Use the show ip rip interface brief command in Privileged EXEC mode to
display general information for each RIP interface. For this command to
display successful results routing must be enabled per interface (i.e. ip rip).
2CSPC4.X8100-SWUM100.book Page 1388 Wednesday, August 29, 2012 6:23 PM