Command Line Interface Guide

Routing Information Protocol Commands 1389
Syntax
show ip rip interface brief
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays general information for each RIP interface.
console#show ip rip interface brief
Send Receive RIP
Link
Interface IP
Address Version Version Mode State
---------- ---------- -------- ----------- -------
-- ----------
vlan1 0.0.0.0 RIP-
2 Both Disable Down
vlan2 0.0.0.0 RIP-
2 Both Disable Down
split-horizon
Use the split-horizon command in Router RIP Configuration mode to set the
RIP split horizon mode. Use the no form of the command to return the mode
to the default value.
2CSPC4.X8100-SWUM100.book Page 1389 Wednesday, August 29, 2012 6:23 PM