Command Line Interface Guide

Command Groups 139
area nssa translator-role Configures the translator role of the NSSA. ROSV3
area nssa translator-stab-
intv
Configures the translator stability interval of the
NSSA.
ROSV3
area range (Router
OSPFv3)
Creates an area range for a specified NSSA. ROSV3
area stub Creates a stub area for the specified area ID. ROSV3
area stub no-summary Disables the import of Summary LSAs for the
stub area identified by
areaid.
ROSV3
area virtual-link Creates the OSPF virtual interface for the
specified
areaid and neighbor .
ROSV3
area virtual-link dead-
interval
Configures the dead interval for the OSPF virtual
interface on the virtual interface identified by
areaid and neighbor .
ROSV3
area virtual-link hello-
interval
Configures the hello interval for the OSPF virtual
interface on the virtual interface identified by
areaid and neighbor .
ROSV3
area virtual-link
retransmit-interval
Configures the retransmit interval for the OSPF
virtual interface on the virtual interface identified
by areaid and neighbor .
ROSV3
area virtual-link transmit-
delay
Configures the transmit delay for the OSPF
virtual interface on the virtual interface identified
by areaid and neighbor .
ROSV3
default-information
originate (Router
OSPFv3 Configuration)
Controls the advertisement of default routes. ROSV3
default-metric Sets a default for the metric of distributed routes. ROSV3
distance ospf Sets the route preference value of OSPF in the
router.
ROSV3
enable Resets the default administrative mode of OSPF
in the router (active).
ROSV3
exit-overflow-interval Configures the exit overflow interval for OSPF. ROSV3
external-lsdb-limit Configures the external LSDB limit for OSPF. ROSV3
Command Description Mode
a
2CSPC4.X8100-SWUM100.book Page 139 Wednesday, August 29, 2012 6:23 PM