Command Line Interface Guide

1416 Virtual Router Redundancy Protocol Commands
Command Mode
User EXEC, Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays all configuration information about the
VLAN 15 virtual router.
console#show vrrp interface vlan 7
Vlan 7 – Group 1
Primary IP Address........................... 192.168.5.55
VMAC Address................................ 0000.5E00.0101
Authentication Type............................ None
Priority....................................... 100
Configured Priority............................ 100
Advertisement Interval (secs).................. 10
Accept Mode.................................... Disable
Pre-empt Mode.................................. Enable
Pre-empt Delay................................. 0
Administrative Mode............................ Enable
State.......................................... Initialized
Timers Learn Mode.............................. Disable
Description.................................... GoodStuff
The following example displays all configuration information about the
virtual router on the selected interface.
console#show vrrp interface brief
Interface VRID IP Address Mode State
--------- ---- -------------- ------ ------------
vlan1 2 0.0.0.0 Disable Initialize
2CSPC4.X8100-SWUM100.book Page 1416 Wednesday, August 29, 2012 6:23 PM