Command Line Interface Guide

142 Command Groups
Router Discovery Protocol
Routing Information Protocol
show ipv6 ospf virtual-
links
Displays the OSPF Virtual Interface information
for a specific area and neighbor.
PE
show ipv6 ospf virtual-
link brief
Displays the OSPFV3 Virtual Interface
information for all areas in the system.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
ip irdp Enables Router Discovery on an interface. IC
ip irdp address Configures the address that the interface uses
to send the router discovery advertisements.
IC
ip irdp holdtime Configures the value, in seconds, of the
holdtime field of the router advertisement sent
from this interface.
IC
ip irdp maxadvertinterval Configures the maximum time, in seconds,
allowed between sending router advertisements
from the interface.
IC
ip irdp minadvertinterval Configures the minimum time, in seconds,
allowed between sending router advertisements
from the interface.
IC
ip irdp multicast Sends router advertisements as IP multicast
packets.
IC
ip irdp preference Configures the preference of the address as a
default router address relative to other router
addresses on the same subnet.
IC
show ip irdp Displays the router discovery information for all
interfaces, or for a specified interface.
PE
Command Description Mode
a
auto-summary Enables the RIP auto-summarization mode. RIP
Command Description Mode
a
2CSPC4.X8100-SWUM100.book Page 142 Wednesday, August 29, 2012 6:23 PM