Command Line Interface Guide

144 Command Groups
Tunnel Interface
Virtual Router Redundancy
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
interface tunnel Enables the interface configuration mode for a
tunnel.
GC
show interfaces tunnel Displays the parameters related to tunnel such
as tunnel mode, tunnel source address and
tunnel destination address.
PE
tunnel destination Specifies the destination transport address of
the tunnel.
IC
tunnel mode ipv6ip Specifies the mode of the tunnel. IC
tunnel source Specifies the source transport address of the
tunnel, either explicitly or by reference to an
interface.
IC
Command Description Mode
a
ip vrrp Enables the administrative mode of Virtual
Router Redundancy Protocol (VRRP) for the
router.
GC
vrrp accept-mode Enables the VRRP Master to accept ping
packets sent to one of the virtual router’s IP
addresses.
IC
vrrp authentication Sets the authentication details value for the
virtual router configured on a specified
interface.
IC
vrrp description Assigns a description to the VRRP group. IC
vrrp ip Sets the virtual router IP address value for an
interface.
IC
vrrp mode Enables the virtual router configured on an
interface. Enabling the status field starts a
virtual router.
IC
2CSPC4.X8100-SWUM100.book Page 144 Wednesday, August 29, 2012 6:23 PM