Command Line Interface Guide

1456 Captive Portal Commands
Command Mode
Captive Portal Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP)#no user 1
show captive-portal user
Use the show captive-portal user command to display all configured users or a
specific user in the captive portal local user database.
Syntax
show captive-portal user [ user-id ]
• user-id —User ID (Range: 1–128).
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal user
Session
User ID User Name Timeout Group ID
Group Name
2CSPC4.X8100-SWUM100.book Page 1456 Wednesday, August 29, 2012 6:23 PM