Command Line Interface Guide

Captive Portal Commands 1463
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal configuration 1 interface
CP ID..................................... 1
CP Name................................... cp1
Operational Block
Interface Interface Description Status
Status
--------- ---------------------------------------- ------------ ---
------
1/0/1 Unit: 1 Slot: 0 Port: 1 Gigabit - Level Disabled
Blocked
console#show captive-portal configuration 1 interface 1/0/1
CP ID..................................... 1
CP Name................................... cp1
Interface................................. 1/0/1
Interface Description..................... Unit: 1 Slot: 0 Port: 1
Gigab...
Operational Status........................ Disabled
Disable Reason............................ Interface Not Attached
Block Status.............................. Not Blocked
Authenticated Users....................... 0
show captive-portal configuration locales
Use the show captive-portal configuration locales command to display
locales associated with a specific captive portal configuration.
Syntax
show captive-portal configuration cp-id locales
• cp-id —Captive Portal Configuration ID.
2CSPC4.X8100-SWUM100.book Page 1463 Wednesday, August 29, 2012 6:23 PM