Command Line Interface Guide

1464 Captive Portal Commands
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal configuration 1 locales
Locale Code
---------------
en
show captive-portal configuration status
Use the show captive-portal configuration status command to display
information about all configured captive portal configurations or about a
specific captive portal configuration.
Syntax
show captive-portal configuration [ cp-id ] status
• cp-id —Captive Portal ID.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
2CSPC4.X8100-SWUM100.book Page 1464 Wednesday, August 29, 2012 6:23 PM