Command Line Interface Guide

Clock Commands 1485
Default Configuration
No authentication.
Command Mode
Global Configuration mode
User Guidelines
The command is relevant for both Unicast and Broadcast.
Example
The following example, after defining the authentication key for SNTP, grants
authentication.
console(config)# sntp authentication-key 8 md5 ClkKey
console(config)# sntp trusted-key 8
console(config)# sntp authenticate
sntp authentication-key
Use the sntp authentication-key command in Global Configuration mode to
define an authentication key for Simple Network Time Protocol (SNTP). To
remove the authentication key for SNTP, use the no form of this command.
Syntax
sntp authentication-key key-number md5 value
no sntp authentication-key number
• key-number — number (Range: 1–4294967295)
•
value — value (Range: 1-8 characters)
Default value
No authentication is defined.
Command Mode
Global Configuration mode
2CSPC4.X8100-SWUM100.book Page 1485 Wednesday, August 29, 2012 6:23 PM