Command Line Interface Guide

1488 Clock Commands
no sntp server { ip-address | ipv6-address | hostname}
• ip-address — IP address of the server.
•
hostname — Hostname of the server. (Range: 1-158 characters)
Parameter Description
This command does not require a parameter description.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the device to accept Simple Network Time
Protocol (SNTP) traffic from the server at IP address 192.1.1.1.
console(config)# sntp server 192.1.1.1
sntp trusted-key
Use the sntp trusted-key command in Global Configuration mode to
authenticate the identity of a system to which Simple Network Time Protocol
(SNTP) will synchronize. To disable authentication of the identity of the
system, use the no form of this command.
Syntax
sntp trusted-key key-number
no sntp trusted-key
key-number
• key-number — Key number of authentication key to be trusted. (Range:
1–4294967295)
2CSPC4.X8100-SWUM100.book Page 1488 Wednesday, August 29, 2012 6:23 PM