Command Line Interface Guide

Configuration and Image File Commands 1505
User Guidelines
Use the show bootvar command to find out which image is the active image.
Example #1
The image1 and image2 keywords are deprecated on the PC81xx only.
The following example loads system image image1 for the next device
startup.
console# boot system image1
Example #2
The following example applies to PC81xx only.
console #boot system ?
active Marks the given image as active for subsequent re-
boots.
backup Marks the given image as active for subsequent re-
boots.
console#show version
Image Descriptions
active :
backup :
Images currently available on Flash
unit active backup current-active next-active
----- -------- ------------ ----------------- -------------
1 <none> <none>
2 5.0.0.7 5.0.0.9 5.0.0.7 5.0.0.9
clear config
Use the clear config command in Privileged EXEC mode to restore the
switch to the default configuration.
2CSPC4.X8100-SWUM100.book Page 1505 Wednesday, August 29, 2012 6:23 PM