Command Line Interface Guide

1508 Configuration and Image File Commands
The following list describes syntax keywords.
• source-url — The location URL or reserved keyword of the source file
being copied. (Range: 1–160 characters.)
•
destination-url — The URL or reserved keyword of the destination file.
(Range: 1–160 characters.)
•
ipaddr — The IPv4 or IPv6 address of the server.
•
hostname — Hostname of the server. (Range: 1–158 characters). The
command allows spaces in the host name when specified in double quotes.
•
filepath — The path to the file on the server.
•
filename — The name of the file on the server.
•
username — The user name for logging into the remote server via SSH.
destination-url The URL or reserved keyword of the destination file. (Range: 1-160
characters.
List of valid destination parameters for downloading to the switch:
backup-config Downloads config file using xmodem,
sftp, or tftp.
image Downloads code file by xmodem, ftp,
sftp, or tftp.
script Downloads configuration script by
xmodem, sftp, or tftp.
startup-config Downloads config file using xmodem or
tftp.
ias-users Downloads the ias-users database file.
Valid destination URLs for uploading from the switch:
xmodem
tftp://{ipaddress | hostname}/filepath/filename
scp://{user@ipaddresss | hostname}/filepath/filename
sftp://{user@ipaddress | hostname}/filepath/filename
flash:// filename
usb:// filename/filename
Parameter Description
2CSPC4.X8100-SWUM100.book Page 1508 Wednesday, August 29, 2012 6:23 PM