Command Line Interface Guide

Configuration and Image File Commands 1519
show backup-config
Use the show backup-config command in Privileged EXEC mode to display
the contents of the backup configuration file.
Syntax
show backup-config
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example shows backup-config data.
console#show backup-config
software version 1.1
hostname device
interface gigabitethernet 1/0/1
ip address 176.242.100.100 255.255.255.0
duplex full
speed 1000
exit
interface gigabitethernet 1/0/2
ip address 176.243.100.100 255.255.255.0
duplex full
speed 1000
2CSPC4.X8100-SWUM100.book Page 1519 Wednesday, August 29, 2012 6:23 PM