Command Line Interface Guide

1522 Configuration and Image File Commands
no exec-banner
exit
line telnet
no login-banner
exit
banner exec "===exec====="
banner login "===login====="
banner motd "===motd====="
exit
show startup-config
Use the show startup-config command in Privileged EXEC mode to display
the startup configuration file contents.
Syntax
show startup-config
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the contents of the startup-config file.
2CSPC4.X8100-SWUM100.book Page 1522 Wednesday, August 29, 2012 6:23 PM