Command Line Interface Guide

Configuration and Image File Commands 1523
PC8024 switch example.
1 : !Current Configuration:
2 : !System Description "Powerconnect 8024F, 4.1.0.6, VxWorks 6.6"
3 : !System Software Version 4.1.0.6
4 : !Cut-through mode is configured as disabled
5 : !
6 : configure
7 : vlan database
8 : vlan 3,1000-1001
9 : vlan routing 1001 1
10 : vlan routing 3 2
11 : exit
12 : stack
13 : member 1 2 ! PC8024F
14 : exit
15 : interface vlan 3
16 : exit
17 : interface vlan 1001
18 : ip address dhcp
19 : exit
20 : username "lvl7" password 5f4dcc3b5aa765d61d8327deb882cf99 privilege
15 encrypted
21 : !
22 : interface Te1/0/3
23 : channel-group 1 mode active
24 : exit
25 : !
26 : interface Te1/0/4
27 : channel-group 1 mode active
2CSPC4.X8100-SWUM100.book Page 1523 Wednesday, August 29, 2012 6:23 PM