Command Line Interface Guide

1524 Configuration and Image File Commands
28 : exit
29 : !
30 : interface Te1/0/17
31 : switchport mode general
32 : switchport general pvid 1001
33 : switchport general allowed vlan add 1000-1001
34 : switchport general allowed vlan remove 1
35 : exit
36 : snmp-server community "public" rw
37 : exit
update bootcode
The update bootcode command is deprecated on the PC81xx only.
Use the update bootcode command in Privileged EXEC mode to update the
bootcode on one or more switches. For each switch, the bootcode is extracted
from the active image and programmed to flash.
Syntax
update bootcode [ unit ]
• unit —Unit number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
If unit is not specified, all units are updated.
Example
The following example updates the bootcode on unit 2.
2CSPC4.X8100-SWUM100.book Page 1524 Wednesday, August 29, 2012 6:23 PM