Command Line Interface Guide

1552 Management ACL Commands
Syntax
show management access-class
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the management access-list information.
console# show management access-class
Management access-class is enabled, using access list
mlist
show management access-list
Use the show management access-list command in Privileged EXEC mode to
display management access-lists.
Syntax
show management access-list [ name ]
• name — A valid access list name. (Range: 1–32 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
2CSPC4.X8100-SWUM100.book Page 1552 Wednesday, August 29, 2012 6:23 PM