Command Line Interface Guide

1594 RMON Commands
show rmon history
Use the show rmon history command in User EXEC mode to display RMON
Ethernet Statistics history. Also see the
rmon collection history command.
Syntax
show rmon history index [throughput | errors | other] [period seconds ]
• index — The requested set of samples. (Range: 1–65535)
•
throughput — Displays throughput counters.
•
errors — Displays error counters.
•
other — Displays drop and collision counters.
•
period seconds — Specifies the requested period time to display. (Range:
0–2147483647)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Examples
The following example displays RMON Ethernet Statistics history for
"throughput" on index number 1.
console> show rmon history 1 throughput
Sample Set: 1 Owner: CLI
Interface: 1/0/1 interval: 1800
Requested samples: 50 Granted samples: 50
Maximum table size: 270
Time Octets Packets Broadcast Multicast %
-------------------- --------- ----------- ------ -------- --
09-Mar-2005 18:29:32 303595962 357568 3289 7287 19
2CSPC4.X8100-SWUM100.book Page 1594 Wednesday, August 29, 2012 6:23 PM