Command Line Interface Guide

160 Command Groups
Syslog
ip ssh pubkey-auth Enables public key authentication for incoming
SSH sessions.
GC
ip ssh server Enables the switch to be configured from a SSH
server connection.
GC
key-string Manually specifies a SSH public key. SK
show crypto key mypubkey Displays its own SSH public keys stored on the
switch.
PE
show crypto key pubkey-
chain ssh
Displays SSH public keys stored on the switch. PE
show ip ssh Displays the SSH server configuration. PE
user-key Specifies which SSH public key is manually
configured and enters the SSH public key-string
configuration command.
SP
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
Command Description Mode
a
clear logging Clears messages from the internal logging
buffer.
PE
clear logging file Clears messages from the logging file. PE
description (Logging) Describes the syslog server. L
level Specifies the importance level of syslog
messages.
L
logging cli-command Enable CLI command logging. GC
logging Logs messages to a syslog server. GC
logging audit Enables switch auditing. GC
logging buffered Limits syslog messages displayed from an
internal buffer based on severity.
GC
Command Description Mode
a
2CSPC4.X8100-SWUM100.book Page 160 Wednesday, August 29, 2012 6:23 PM