Command Line Interface Guide

Command Groups 161
System Management
logging console Limits messages logged to the console based on
severity.
GC
logging facility Configures the facility to be used in log
messages.
GC
logging file Limits syslog messages sent to the logging file
based on severity.
GC
logging on Controls error messages logging. GC
logging snmp Enables SNMP Set command logging. GC
logging web-session Enables web session logging. GC
port Specifies the port number of syslog messages. L
show logging Displays the state of logging and the syslog
messages stored in the internal buffer.
PE
show logging file Displays the state of logging and the syslog
messages stored in the logging file.
PE
show syslog-servers Displays the syslog servers settings. PE
terminal monitor Enables the display of logging messages on the
terminal.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
Command Description Mode
a
asset-tag Specifies the switch asset-tag. GC
banner exec Sets the message that is displayed after a
successful login.
GC
banner login Sets the message that is displayed just before
the login prompt.
GC
banner motd Specifies message-of-the-day banner. GC
banner motd
acknowledge
Acknowledges message-of-the-day banner. GC
clear checkpoint
statistics
Clears the statistics for the checkpointing
process.
GC
Command Description Mode
a
2CSPC4.X8100-SWUM100.book Page 161 Wednesday, August 29, 2012 6:23 PM