Command Line Interface Guide

Command Groups 163
show process cpu Checks the CPU utilization for each process
currently running on the switch.
PE
show sessions Displays a list of the open telnet sessions to
remote hosts.
PE
show slot Displays information about all the slots in the
system or for a specific slot.
UE
show supported cardtype Displays information about all card types
supported in the system.
UE
show supported
switchtype
Displays information about all supported switch
types.
UE
show switch Displays information about the switch status. UE
show system Displays system information. UE
show system fan
Explicitly displays the fan status.
UE or PE
show system id Displays the service ID information. UE
show system power Displays information about the system level
power consumption.
UE or PE
show system
temperature
Displays information about the system
temperature and fan status.
UE or PE
show tech-support Displays system and configuration information
(for debugging/calls to technical support).
PE
show users Displays information about the active users,
including which profiles have been assigned to
local user accounts and which profiles are active
for logged-in users.
PE
show version Displays the system version information. UE
stack Sets the mode to Stack Global Configuration
mode.
GC
telnet Logs into a host that supports Telnet. PE
traceroute Discovers the IP routes that packets actually
take when travelling to their destinations.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
Command Description Mode
a
2CSPC4.X8100-SWUM100.book Page 163 Wednesday, August 29, 2012 6:23 PM