Command Line Interface Guide

Sflow Commands 1637
Default Configuration
There are no samplers configured by default.
The default sampling rate is 0.
The default maximum header size is 128.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
This command has no user guidelines.
Example
console(config-if-1/0/15)#sflow 1 sampler 1500 50
show sflow agent
Use the show sflow agent command to display the sflow agent information.
Syntax
show sflow agent
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
The following fields are displayed:
2CSPC4.X8100-SWUM100.book Page 1637 Wednesday, August 29, 2012 6:23 PM