Command Line Interface Guide

1646 SNMP Commands
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the SNMP engine ID.
console# show snmp engineID
Local SNMP engineID: 08009009020C0B099C075878
show snmp filters
Use the show snmp filters command in Privileged EXEC mode to display the
configuration of filters.
Syntax
show snmp filters filtername
• filtername — Specifies the name of the filter. (Range: 1-30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
2CSPC4.X8100-SWUM100.book Page 1646 Wednesday, August 29, 2012 6:23 PM