Command Line Interface Guide

1648 SNMP Commands
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
The group name accepts any printable characters except a double quote or
question mark. Enclose the string in double quotes to include spaces within
the name. The surrounding quotes are not used as part of the name. The CLI
does not filter illegal characters and may accept entries up to the first illegal
character or reject the entry entirely.
Example
The following examples display the configuration of views.
console# show snmp group
Name Security Views
Model Level Read Write
Notify
----------------- ----- ------ -------- -----
--- ------
user-group V3 Auth-Priv Default ""
""
managers-group V3 NoAuth-priv Default
Default ""
managers-group V3 NoAuth-priv Default "" ""
console# show snmp groups user-group
Name Security Views
2CSPC4.X8100-SWUM100.book Page 1648 Wednesday, August 29, 2012 6:23 PM