Command Line Interface Guide

Syslog Commands 1695
Syntax
logging buffered [ severity–level ]
no logging buffered
Parameter Description
Default Configuration
The default value for level is info.
Command Mode
Global Configuration mode
User Guidelines
All the syslog messages are logged to the internal buffer. This command limits
the commands displayed to the user.
Example
The following example limits syslog messages displayed from an internal
buffer based on the severity level "error."
console(config)#logging buffered error
Parameter Description
severity–level (Optional) The number or name of the desired severity level.
Range:
[0 | emergencies]
[
1 | alerts]
[
2 | critical]
[
3 | errors]
[
4 | warnings]
[
5 | notifications]
[
6 | informational]
[
7 | debugging]
2CSPC4.X8100-SWUM100.book Page 1695 Wednesday, August 29, 2012 6:23 PM